Cavability Assessment in Narigan IIX Mine Using Empirical and Numerical Methods | |
| روش های تحلیلی و عددی در مهندسی معدن | |
| مقاله 6، دوره 14، شماره 41، دی 1403، صفحه 55-68 اصل مقاله (890.33 K) | |
| نوع مقاله: مقاله پژوهشی | |
| شناسه دیجیتال (DOI): 10.22034/anm.2025.22150.1645 | |
| نویسندگان | |
| Alireza Jabinpour* ؛ Alireza Yarahmadi Bafghi؛ Seyyed Ali Ahooie | |
| Dept. of Mining and Metallurgy Engineering, Yazd University, Yazd, Iran | |
| چکیده | |
| This paper introduces a comprehensive study of the cavability of rock mass in the Narigan IIX mine through the application of empirical and numerical methods. The assessment of caving requirements is crucial for ensuring the safety and efficiency of underground mining operations. First, this study integrates all needed data with field investigations and laboratory tests used in empirical approaches and advanced numerical modeling to evaluate the cavability of the rock mass. After that, employing Laubscher's chart and Mathews's stability graph, rock mass was classified, and the minimum required HR was calculated for all Narigan IIX mi tectonic blocks. On the other hand, to evaluate empirical approach results, endeavor to create a beneficial model by DEM and obtain more insights about the caving process. The findings from both empirical and numerical analyses led to a minimum HR equal to 18 m with a square shape for undercut and the cave angle near 70 degrees. The results of this study are anticipated to contribute to improved mining practices and enhanced safety measures in similar geological settings. | |
| کلیدواژهها | |
| underground mining؛ Cavability estimation؛ empirical method؛ DEM؛ Narigan IIX mine | |
| عنوان مقاله [English] | |
| Cavability Assessment in Narigan IIX Mine Using Empirical and Numerical Methods | |
| نویسندگان [English] | |
| Alireza Jabinpour؛ Alireza Yarahmadi Bafghi؛ Seyyed Ali Ahooie | |
| Dept. of Mining and Metallurgy Engineering, Yazd University, Yazd, Iran | |
| چکیده [English] | |
| This paper introduces a comprehensive study of the cavability of rock mass in the Narigan IIX mine through the application of empirical and numerical methods. The assessment of caving requirements is crucial for ensuring the safety and efficiency of underground mining operations. First, this study integrates all needed data with field investigations and laboratory tests used in empirical approaches and advanced numerical modeling to evaluate the cavability of the rock mass. After that, employing Laubscher's chart and Mathews's stability graph, rock mass was classified, and the minimum required HR was calculated for all Narigan IIX mi tectonic blocks. On the other hand, to evaluate empirical approach results, endeavor to create a beneficial model by DEM and obtain more insights about the caving process. The findings from both empirical and numerical analyses led to a minimum HR equal to 18 m with a square shape for undercut and the cave angle near 70 degrees. The results of this study are anticipated to contribute to improved mining practices and enhanced safety measures in similar geological settings. | |
| کلیدواژهها [English] | |
| underground mining, Cavability estimation, empirical method, DEM, Narigan IIX mine | |
| مراجع | |
|
[1] Darling, P., SME mining engineering handbook. Vol. 1. 2011: SME.
[2] Kendorski, F., CAVABILITY OF ORE DEPOSITS. Min Eng (New York), 1978. 30: p. 628-631.
[3] Kendorski, F., et al. Rock mass classification for block caving mine drift support. in ISRM Congress. 1983. ISRM.
[4] Brady, B.H.G. and E. Brown, Rock Mechanics for underground mining: Third edition. 2006. 1-628.
[5] Laubscher, D.H., A geomechanics classification system for rating of rock mass in mine design. Journal South African Inst. of Mining and Metallurgy, 1990. 90: p. 257-273.
[6] Laubscher, D., Cave mining-the state of the art. Journal of The Southern African Institute of Mining and Metallurgy, 1994. 94(10): p. 279-293.
[7] Laubscher, D., Block caving manual. Prepared for international caving study. JKMRC and Itasca Consulting Group, Brisbane, 2000.
[8] Laubscher, D., Geomechanics classification of jointed rock masses: mining applications. Inst. Min. Metall., Trans., Sect. A;(United Kingdom), 1977. 86.
[9] Mathews, K., et al., Prediction of stable excavations for mining at depth below 1000m in hard rock. CANMET Report, 1981.
[10] Obert, L., R. Munson, and C. Rich, CAVING PROPERTIES OF THE CLIMAX ORE BODY. Trans Soc Min Eng AIME, 1976. 260: p. 129-133.
[11] McDonough, J.T. Site evaluation for cavability and underground support design at the Climax mine. in ARMA US Rock Mechanics/Geomechanics Symposium. 1976. ARMA.
[12] Ghose, A. and D. Dutta, A rock mass classification model for caving roofs. International Journal of Mining and Geological Engineering, 1987. 5: p. 257-271.
[13] Lacy, W. Cavability Investigation Of A Stratabound Copper Deposit, Tong Kuang Yu Mine, Shanxi Province, China. in ARMA US Rock Mechanics/Geomechanics Symposium. 1989. ARMA.
[14] Lorig, L., et al. Influence of discontinuity orientations and strength on cavability in a confined environment. in ARMA US Rock Mechanics/Geomechanics Symposium. 1989. ARMA.
[15] Wang, L., Cavability classification model in block caving. 1996. 6: p. 5-9.
[16] Duplancic, P. and B. Brady. Characterisation of caving mechanisms by analysis of seismicity and rock stress. in ISRM Congress. 1999. ISRM.
[17] Hassen, F.H., L. Spinnler, and J. Fine. A new approach for rock mass cavability modeling. in International journal of rock mechanics and mining sciences & geomechanics abstracts. 1993. Elsevier.
[18] Jakubec, J. and D.H. Laubscher. The MRMR rock mass rating classification system in mining practice. in Proceedings of the 3rd international conference and exhibition on mass mining, Brisbane, Australia. 2000.
[19] Jakubec, J. and G.S. Esterhuizen, Use Of The Mining Rock Mass Rating (MRMR) Classification: Industry Experience; Proceedings Of The International Workshop On Rock Mass Classification In Underground Mining. 2007.
[20] Chitombo, G., Cave mining: 16 years after Laubscher's 1994 paper ‘Cave mining–state of the art'. Mining Technology, 2010. 119(3): p. 132-141.
[21] Stewart, P. and R. Trueman. The Extended Mathews Stability Graph: Quantifying case history requirements and site-specific effects. 2001. Citeseer.
[22] Mawdesley, C., R. Trueman, and W. Whiten, Extending the Mathews stability graph for open–stope design. Mining Technology, 2001. 110(1): p. 27-39.
[23] Suorineni, F.T., The stability graph after three decades in use: experiences and the way forward. International journal of mining, Reclamation and Environment, 2010. 24(4): p. 307-339.
[24] Suorineni, F.T., A critical review of the stability graph method for open stope design. MassMin 2012, 2012: p. 10-14.
[25] Jabinpour, A. and M. Shahreza, Comparison between Laubscher and Mathews approaches for rock mass cavability prediction, in 30th Symposium of Geological Sciences. 2012: Tehran, Iran.
[26] Rance, J., et al. Computational modeling of multiple fragmentation in rock masses with application to block caving. in ARMA Canada-US Rock Mechanics Symposium. 2007. ARMA.
[27] Feng, X., et al., Cavability of rock mass based on 3 D simulation technology. Journal of China coal society, 2008. 33(9): p. 971-976.
[28] Sainsbury, B., M. Pierce, and D. Mas Ivars. Analysis of Caving Behaviour Using a Synthetic Rock Mass — Ubiquitous Joint Rock Mass Modelling Technique. in SHIRMS 2008: Proceedings of the First Southern Hemisphere International Rock Mechanics Symposium. 2008. Australian Centre for Geomechanics.
[29] Jafari, A. and M. Khishvand. Geometry identification of fracture rock for evaluation of cavability of ore deposit. in International Mining Congress and Expo, Tehran, Iran. 2010.
[30] Blachowski, J. and S. Ellefmo, Numerical modelling of rock mass deformation in sublevel caving mining system. Acta Geodynamica et Geomaterialia, 2012. 9(3): p. 167.
[31] Jabinpoor, A., A. Jafari, and M.Y. Shahreza, Estimation of rock cavability in jointed roof in longwall mining, in 13th Coal Operators' Conference. 2013, The Australasian Institute of Mining and Metallurgy & Mine Managers Association of Australia: University of Wollongong. p. 68-73.
[32] Jabinpour, A., A. Jafari, and M. Shahreza, The investigating of cavabibity of rock mass and parameters effecting on it with UDEC software, in first international conference on mining, mineral processing, metallurgical and environmental engineering. 2013: Zanjan, Iran.
[33] Ren, F., et al., Study on the rock mass caving and surface subsidence mechanism based on an in situ geological investigation and numerical analysis. Mathematical Problems in Engineering, 2018. 2018(1): p. 6054145.
[34] Le, T.D., et al., A new cavability assessment for longwall top coal caving from discontinuum numerical analysis. International Journal of Rock Mechanics and Mining Sciences, 2019. 115: p. 11-20.
[35] Rafiee, R., et al., Numerical modeling of influence parameters in cavabililty of rock mass in block caving mines. International Journal of Rock Mechanics and Mining Sciences, 2018. 105: p. 22-27.
[36] Merino, L. and R. Tapia, Cavability of Inca Sector, El Salvador Mine, in FLAC and Numerical Modeling in Geomechanics-2001. 2020, CRC Press. p. 273-279.
[37] Alipenhani, B., A. Majdi, and H. Bakhshandeh Amnieh, Cavability assessment of rock mass in block caving mining method based on numerical simulation and response surface methodology. Journal of Mining and Environment, 2022. 13(2): p. 579-606.
[38] Alipenhani, B., H. Bakhshandeh Amnieh, and A. Majdi, Application of finite element method for simulation of rock mass caving processes in block caving method. International Journal of Engineering, 2023. 36(1): p. 139-151.
[39] Chang-Sheng, H., Study on cavability classification based on analysis of rock mass structure characteristics. Journal of Mining and Safety Engineering, 2012. 29(6): p. 845.
[40] Vakili, A. and B. Hebblewhite, A new cavability assessment criterion for longwall top coal caving. International Journal of Rock Mechanics and Mining Sciences, 2010. 47(8): p. 1317-1329.
[41] Rafiee, R., et al., Determination and assessment of parameters influencing rock mass cavability in block caving mines using the probabilistic rock engineering system. Rock Mechanics and Rock Engineering, 2015. 48: p. 1207-1220.
[42] Cao, H., et al., Research on comprehensive evaluation of cavability of block caving based on MRMR. 2016. 35: p. 4148-4153.
[43] Jabinpour, A., A. Yarahmadi Bafghi, and J. Gholamnejad, Geostatistical modelling of rock mass cavability based on laubscher approach in Sechahoon Mine. Journal of Mineral Resources Engineering, 2018. 3(2): p. 53-69.
[44] Sui, J., et al., Numerical analysis for the caving characteristics of rock mass with inclined joints in caving mining. Advances in Civil Engineering, 2021. 2021(1): p. 9917744.
[45] Rafiee, R., M. Ataei, and R. KhalooKakaie, A new cavability index in block caving mines using fuzzy rock engineering system. International Journal of Rock Mechanics and Mining Sciences, 2015. 77: p. 68-76.
[46] Gautam, B., et al. Assessment of Cavability and categorization of coal measure roof rocks by parting plane approach. in Recent advances in rock engineering (RARE 2016). 2016. Atlantis Press.
[47] Rafiee, R., et al., A fuzzy rock engineering system to assess rock mass cavability in block caving mines. Neural Computing and Applications, 2016. 27: p. 2083-2094.
[48] He, R., et al., A fuzzy comprehensive assessment approach and application of rock mass cavability in block caving mining. Mathematical Problems in Engineering, 2019. 2019(1): p. 2063640.
[49] Zhou, J., et al., Novel approach to evaluate rock mass fragmentation in block caving using unascertained measurement model and information entropy with flexible credible identification criterion. Engineering with Computers, 2022. 38(Suppl 5): p. 3789-3809.
[50] Koosha.Madan.Engineering.Consultant, Final report of exploration studies of Bafgh No. IIX iron ore anomally. 2008, IMPASCO.
[51] Suzuki Morales, K., F.T. Suorineni, and B. Hebblewhite, Orebody cavability prediction challenges in block caving mining—a review. Bulletin of Engineering Geology and the Environment, 2024. 83(1): p. 23.
[52] Pichuante Allende, H., Sensitivity analysis to assess cavability using finite/discrete element models-a review of the mining adjustments to the in-situ rock mass rating (IRMR). 2024, University of British Columbia.
[53] Shapka-Fels, T. and D. Elmo, Numerical Modelling Challenges in Rock Engineering with Special Consideration of Open Pit to Underground Mine Interaction. Geosciences, 2022. 12(5): p. 199.
[54] Dehghanipoodeh, M., et al. 3D Numerical Modeling of Strength in Fractured Rock Mass. 2017. Singapore: Springer Singapore.
[55] Nikolić, M., T. Roje-Bonacci, and A. Ibrahimbegović, Overview of the numerical methods for the modelling of rock mechanics problems. Tehnički vjesnik, 2016. 23(2): p. 627-637.
|
|
آمار
تعداد مشاهده مقاله: 175
تعداد دریافت فایل اصل مقاله: 208