Comparison of Infinite Fracture Model (IFM) and Discrete Fracture Network (DFN) for Estimating the Volume of In-Situ Blocks in Dimension Stone Mines with a Focus on UAV Photogrammetry | |
| روش های تحلیلی و عددی در مهندسی معدن | |
| مقاله 2، دوره 14، شماره 41، دی 1403، صفحه 13-21 اصل مقاله (1.22 M) | |
| نوع مقاله: مقاله پژوهشی | |
| شناسه دیجیتال (DOI): 10.22034/anm.2025.22466.1652 | |
| نویسندگان | |
| Amirhossein Vahedi* ؛ Alireza Baghbanan؛ Amin Azhari؛ Ahmad Rahmani Shahraki؛ Sina Mirzabeigi | |
| Department of Mining Engineering, Isfahan University of Technology, Isfahan, Iran | |
| چکیده | |
| The dimension stone extraction industry serves as a vital economic sector in numerous countries, particularly in Iran, necessitating the implementation of innovative and efficient methods to optimize extraction processes and manage mineral resources. This paper focuses on the application of digital photogrammetry techniques and drone technology in the extraction and modeling of dimension stone quarries, specifically examining the Josheghan marble mine located in Isfahan Province. The study emphasizes the significance of identifying and analyzing fractures as key factors in enhancing the quality of extracted blocks, illustrating how modern methodologies can lead to optimized extraction processes and increased profitability for quarries. The research is based on two principal hypotheses: the Infinite Fracture Model (IFM) and the Discrete Fracture Network (DFN) model. The IFM posits that fractures extend indefinitely within the rock mass, a premise that may lead to inaccurate estimations of block volumes. In contrast, the DFN model provides more precise estimations of block volumes and quality by accounting for the complexities of geological structures and the presence of hidden fractures. To achieve accurate information regarding fractures and the structural characteristics of the mine, several procedures were undertaken in this research. Following the initial survey, seven scanlines, each 22 meters in length, were established at various locations within the mine to gather detailed data on fracture intensity and related features. The results indicate that effective management of dimension stone resources is contingent upon a thorough understanding of geological conditions and precise modeling of discontinuities within the rock mass. The use of advanced techniques such as digital photogrammetry and drone technology can significantly enhance extraction efficiency, ultimately contributing to the sustainable development of the dimension stone industry. The parameters P10 and P32 in this study were utilized as the primary criteria for analyzing discontinuities. Using specialized software, 70 Discrete Fracture Network (DFN) models were generated and calculated separately based on the values of P32. These models were employed to simulate the behavior of rock blocks and estimate their volumes in the selected qua-contrast face. Ultimately, based on the data obtained from the conducted surveys, ten distinct DFN models were created for the entire area of the mine. These models were designed based on information related to hidden fractures and the structural complexities of the rock, facilitating more accurate estimations of the volumes of extracted blocks. The results indicate that the DFN model, by taking into account the real complexities present in the geological structure, provides more precise estimates of expected block volumes. This research clearly demonstrates that the application of modern photogrammetry methods and DFN modeling can enhance the extraction process of dimension stones. The insights gained from the analysis of discontinuities and modeling not only contribute to a better understanding of the geological structure of the mine but also lead to more effective managerial and economic decision-making in the field of mineral resource extraction. These findings could be particularly beneficial for dimension stone quarries in Iran, which face various challenges and could aid in sustainable development and optimization of mineral resources. | |
| کلیدواژهها | |
| Quarry Mine؛ UAV؛ İn-Situ Block Volume؛ Discrete Fracture Network؛ Infinite Fracture Model | |
| عنوان مقاله [English] | |
| Comparison of Infinite Fracture Model (IFM) and Discrete Fracture Network (DFN) for Estimating the Volume of In-Situ Blocks in Dimension Stone Mines with a Focus on UAV Photogrammetry | |
| نویسندگان [English] | |
| Amirhossein Vahedi؛ Alireza Baghbanan؛ Amin Azhari؛ Ahmad Rahmani Shahraki؛ Sina Mirzabeigi | |
| Department of Mining Engineering, Isfahan University of Technology, Isfahan, Iran | |
| چکیده [English] | |
| The dimension stone extraction industry serves as a vital economic sector in numerous countries, particularly in Iran, necessitating the implementation of innovative and efficient methods to optimize extraction processes and manage mineral resources. This paper focuses on the application of digital photogrammetry techniques and drone technology in the extraction and modeling of dimension stone quarries, specifically examining the Josheghan marble mine located in Isfahan Province. The study emphasizes the significance of identifying and analyzing fractures as key factors in enhancing the quality of extracted blocks, illustrating how modern methodologies can lead to optimized extraction processes and increased profitability for quarries. The research is based on two principal hypotheses: the Infinite Fracture Model (IFM) and the Discrete Fracture Network (DFN) model. The IFM posits that fractures extend indefinitely within the rock mass, a premise that may lead to inaccurate estimations of block volumes. In contrast, the DFN model provides more precise estimations of block volumes and quality by accounting for the complexities of geological structures and the presence of hidden fractures. To achieve accurate information regarding fractures and the structural characteristics of the mine, several procedures were undertaken in this research. Following the initial survey, seven scanlines, each 22 meters in length, were established at various locations within the mine to gather detailed data on fracture intensity and related features. The results indicate that effective management of dimension stone resources is contingent upon a thorough understanding of geological conditions and precise modeling of discontinuities within the rock mass. The use of advanced techniques such as digital photogrammetry and drone technology can significantly enhance extraction efficiency, ultimately contributing to the sustainable development of the dimension stone industry. The parameters P10 and P32 in this study were utilized as the primary criteria for analyzing discontinuities. Using specialized software, 70 Discrete Fracture Network (DFN) models were generated and calculated separately based on the values of P32. These models were employed to simulate the behavior of rock blocks and estimate their volumes in the selected qua-contrast face. Ultimately, based on the data obtained from the conducted surveys, ten distinct DFN models were created for the entire area of the mine. These models were designed based on information related to hidden fractures and the structural complexities of the rock, facilitating more accurate estimations of the volumes of extracted blocks. The results indicate that the DFN model, by taking into account the real complexities present in the geological structure, provides more precise estimates of expected block volumes. This research clearly demonstrates that the application of modern photogrammetry methods and DFN modeling can enhance the extraction process of dimension stones. The insights gained from the analysis of discontinuities and modeling not only contribute to a better understanding of the geological structure of the mine but also lead to more effective managerial and economic decision-making in the field of mineral resource extraction. These findings could be particularly beneficial for dimension stone quarries in Iran, which face various challenges and could aid in sustainable development and optimization of mineral resources. | |
| کلیدواژهها [English] | |
| Quarry Mine, UAV, İn-Situ Block Volume, Discrete Fracture Network, Infinite Fracture Model | |
| مراجع | |
|
[1] Á. Török, G. Bögöly, Á. Somogyi, and T. Lovas, "Application of UAV in topographic modeling and structural geological mapping of quarries and their surroundings—delineation of fault-bordered raw material reserves," Sensors, vol. 20, no. 2, p. 489, 2020.
[2] L. Sousa, J. Lourenço, and D. Pereira, "Suitable re-use of abandoned quarries for restoration and conservation of the old city of Salamanca—World Heritage site," Sustainability, vol. 11, no. 16, p. 4352, 2019.
[3] R. Salvini, G. Mastrorocco, M. Seddaiu, D. Rossi, and C. Vanneschi, "The use of an unmanned aerial vehicle for fracture mapping within a marble quarry (Carrara, Italy): photogrammetry and discrete fracture network modeling," Geomatics, Natural Hazards and Risk, vol. 8, no. 1, pp. 34-52, 2017.
[4] J. J. Cress, M. E. Hutt, J. L. Sloan, M. A. Bauer, M. R. Feller, and S. E. Goplen, "US Geological Survey unmanned aircraft systems (UAS) roadmap 2014," US Geological Survey, 2331-1258, 2015.
[5] S. Lee and Y. Choi, "Reviews of unmanned aerial vehicle (drone) technology trends and its applications in the mining industry," Geosystem Engineering, vol. 19, no. 4, pp. 197-204, 2016.
[6] A. Vahedi, A. Baghbana, A. Azhari, and A. Rahmani-Shahraki, "Implementation and Integration of Unmanned Aerial Vehicle (UAV) Technology in Open-Pit and Underground Mining Operations: A Comprehensive Analysis of Current Applications, Emerging Challenges, and Future Prospects in the Mining Engineering," Journal of Analytical and Numerical Methods in Mining Engineering, 2024.
[7] S. Mosch, D. Nikolayew, O. Ewiak, and S. Siegesmund, "Optimized extraction of dimension stone blocks," Environmental Earth Sciences, vol. 63, pp. 1911-1924, 2011.
[8] S. Mosch, "Optimierung der exploration, gewinnung und materialcharakterisierung von naturwerksteinen," 2009.
[9] J. Ehlen, "Fracture characteristics in weathered granites," Geomorphology, vol. 31, no. 1-4, pp. 29-45, 1999.
[10] M. E. M. Akara, D. M. Reeves, and R. Parashar, "Enhancing fracture-network characterization and discrete-fracture-network simulation with high-resolution surveys using unmanned aerial vehicles," Hydrogeology Journal, vol. 28, no. 7, 2020.
[11] D. Nikolayev, S. Siegesmund, S. Mosch, and A. Hoffmann, "Modell-based prediction of unfractured rock masses," 2007.
[12] I. Santos, L. Sousa, and J. Lourenço, "Granite resource evaluation: example of an extraction area in the north of Portugal," Environmental Earth Sciences, vol. 77, pp. 1-14, 2018.
[13] L. Sousa, J. Barabasch, K.-J. Stein, and S. Siegesmund, "Characterization and quality assessment of granitic building stone deposits: A case study of two different Portuguese granites," Engineering Geology, vol. 221, pp. 29-40, 2017.
[14] L. Sousa, A. Oliveira, and I. Alves, "Influence of fracture system on the exploitation of building stones: the case of the Mondim de Basto granite (north Portugal)," Environmental Earth Sciences, vol. 75, pp. 1-16, 2016.
[15] D. Freire-Lista and R. Fort, "Exfoliation microcracks in building granite. Implications for anisotropy," Engineering Geology, vol. 220, pp. 85-93, 2017.
[16] A. Lazar, G. Vižintin, T. Beguš, and M. Vulić, "The use of precise survey techniques to find the connection between discontinuities and surface morphologic features in the laže quarry in slovenia," Minerals, vol. 10, no. 4, p. 326, 2020.
[17] F. Medinac, Advances in pit wall mapping and slope assessment using unmanned aerial vehicle technology. University of Toronto (Canada), 2019.
[18] B. Figarska-Warchoł and G. Stańczak, "Using digital photographs and orthophotomaps of a quarry to assess the geometry and density of discontinuities in a sandstone deposit," Archives of Mining Sciences, vol. 64, no. 3, 2019.
[19] S. Mustafa et al., "Building stone evaluation—A case study of the sub-Himalayas, Muzaffarabad region, Azad Kashmir, Pakistan," Engineering Geology, vol. 209, pp. 56-69, 2016.
[20] M. Morales Demarco, P. Oyhantçabal, K.-J. Stein, and S. Siegesmund, "Granitic dimensional stones in Uruguay: evaluation and assessment of potential resources," Environmental earth sciences, vol. 69, no. 4, pp. 1397-1438, 2013.
|
|
آمار
تعداد مشاهده مقاله: 362
تعداد دریافت فایل اصل مقاله: 264