Numerical modeling for Selection of appropriate tunneling method in S station of Isfahan subway | ||
| روش های تحلیلی و عددی در مهندسی معدن | ||
| مقاله 3، دوره 11، شماره 29، اسفند 1400، صفحه 27-40 اصل مقاله (556.94 K) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22034/anm.2022.2030 | ||
| نویسندگان | ||
| Enayatallah Emami Meybodi* ؛ Jamaloddin Hajibagheri Foroshani؛ Fariba Kargaran Bafghi | ||
| Department of Geology, Yazd University, Yazd, Iran | ||
| چکیده | ||
| Nowadays, due to the increasing urban environments, increasing the density of surface structures and the lack of space for intra-urban transportation, the need to implement underground structures such as tunnels and subway stations in urban environments has been felt more than ever. One of the important factors in the implementation of deep underground stations in urban environments is the choice of suitable excavation methods that have a significant impact on the stability of the tunnel space during excavation, surface sinking caused by drilling, and also the long-term stability of the excavated space. In this research, considering the geotechnical characteristics of the land and the geometry of the station under study, three common methods for excavation of subway station, including NATM, STM, and cut & cover methods with support systems such as shotcrete, piles and ribs, fore polling and nailing numerically modeled and have been evaluated and reviewed for the stability of the space and tunnel wall displacement. Numerical modeling of various methods for implementing this space has been done using the finite difference method with FLAC3D software. Sensitivity analysis for changing geometric parameters of support systems was done. According to the results, the maximum displacement in the environment around the station is related to the cut & cover method and the minimum is related to the STM method with the nailing support system. | ||
| کلیدواژهها | ||
| Subway station؛ NATM؛ STM؛ Cut & cover؛ support systems؛ Numerical Modeling | ||
| عنوان مقاله [English] | ||
| Numerical modeling for Selection of appropriate tunneling method in S station of Isfahan subway | ||
| نویسندگان [English] | ||
| Enayatallah Emami Meybodi؛ Jamaloddin Hajibagheri Foroshani؛ Fariba Kargaran Bafghi | ||
| Department of Geology, Yazd University, Yazd, Iran | ||
| چکیده [English] | ||
| Nowadays, due to the increasing urban environments, increasing the density of surface structures and the lack of space for intra-urban transportation, the need to implement underground structures such as tunnels and subway stations in urban environments has been felt more than ever. One of the important factors in the implementation of deep underground stations in urban environments is the choice of suitable excavation methods that have a significant impact on the stability of the tunnel space during excavation, surface sinking caused by drilling, and also the long-term stability of the excavated space. In this research, considering the geotechnical characteristics of the land and the geometry of the station under study, three common methods for excavation of subway station, including NATM, STM, and cut & cover methods with support systems such as shotcrete, piles and ribs, fore polling and nailing numerically modeled and have been evaluated and reviewed for the stability of the space and tunnel wall displacement. Numerical modeling of various methods for implementing this space has been done using the finite difference method with FLAC3D software. Sensitivity analysis for changing geometric parameters of support systems was done. According to the results, the maximum displacement in the environment around the station is related to the cut & cover method and the minimum is related to the STM method with the nailing support system. | ||
| کلیدواژهها [English] | ||
| Subway station, NATM, STM, Cut & cover, support systems, Numerical Modeling | ||
| مراجع | ||
|
[1] Toraño, Javier, Rafael Rodríguez, Isidro Diego, and José M. Rivas. "Estimation of settlements due to shallow tunnels and their effects." Tunnelling and Underground Space Technology 21, no. 3-4 (2006).
[2] Yoo, Chungsik. "Performance of multi-faced tunnelling–A 3D numerical investigation." Tunnelling and underground space technology 24, no. 5 (2009): 562-573.
[3] Sharifzadeh, Mostafa, Farshad Kolivand, Masoud Ghorbani, and Shahaboddin Yasrobi. "Design of sequential excavation method for large span urban tunnels in soft ground–Niayesh tunnel." Tunnelling and Underground Space Technology 35 (2013): 178-188.
[4] Nowruzi Bazminabadi S, Ramezanzadeh A, Karimi Andani M, Hajar M, "Evaluation of the temporary maintenance system of Tehran Niayesh tunnel based on meeting on urban lands", 10th International Congress of Civil Engineering, Tabriz, 2015. ( In Persian)
[5] Khanlari Gh., Maleki M, Heidari Turkmani R, Alipour S, Naseri F, "Estimation of surface subsidence in Niayesh Highway Tunnel using experimental, numerical and real settlements methods" Journal of Engineering Geology, 9,2015. ( In Persian)
[6] Hejazi Rad, S, Ganjian N, Mansouri M.R. "Study of appropriate methods of multi-stage drilling of deep underground stations - a case study of station x7 of Tehran metro line seven." Tunnel and underground spaces engineering, 2015; 4 (1): 33-52. ( In Persian)
[7] Rihanian Zavareh, H., Hosseini, F and Talebinejad, A,R., "Determining the optimal distance of concrete arches and estimating the meeting in metro stations - Case study: Haft Tir station of Tehran metro line 6". Tunnel and underground spaces engineering, 2014; 2 (2): 121-132. ( In Persian) doi: 10.22044 / tuse.2014.254
[8] Ocak, Ibrahim. "Control of surface settlements with umbrella arch method in second stage excavations of Istanbul Metro." Tunnelling and Underground Space Technology 23, no. 6 (2008): 674-681.
[9] Sadaghiani, Mohammad H., and Saleh Dadizadeh. "Study on the effect of a new construction method for a large span metro underground station in Tabriz-Iran." Tunnelling and underground space technology 25, no. 1 (2010): 63-69.
[10] Fang, Qian, Dingli Zhang, and Louis Ngai Yuen Wong. "Shallow tunnelling method (STM) for subway station construction in soft ground." Tunnelling and Underground Space Technology 29 (2012): 10-30.
[11] Moqbeli Oskooi A, Ajamzadeh H, Mansourzadeh Sam, Ismailpour Ghamshlour, "Application of Shallow Tunneling Method for Crossover Drilling in Poor Soils (Case Study: Shiraz Metro)", Transportation Research Journal, 2018 , 4, 60-45. ( In Persian)
[12] Shariatmadari, N., P. Chaichi, and M. Moazami. "The survey of ground surface settlement caused by cut and cover tunnel excavation in Tabriz subway." Tunnelling and Underground Space Technology 21, no. 3-4 (2006).
[13] Wang, Tie Cheng, Yang Gao, and Hai Long Zhao. "Analysis of Mechanical Behavior of Subway Tunnel Constructed by Cover and Cut Reverse Method." In Advanced Materials Research, vol. 446, pp. 3623-3627. Trans Tech Publications Ltd, 2012.
[14] Zhou, Xiao Jun, Jing He Wang, Lu Lu Mao, and Rui Guo. "Design of Typical Subway Station Structure and its Enclosure with Open Cut Method in Chengdu City." In Applied Mechanics and Materials, vol. 501, pp. 1711-1714. Trans Tech Publications Ltd, 2014
[15] Guo, Yan Hui, and Ke Peng Hou. "Numerical simulation of ground surface settlement induced by open-cut subway station." In Applied Mechanics and Materials, vol. 522, pp. 1689-1692. Trans Tech Publications Ltd, 2014.
[16] Zhou, Shunhua, Honggui Di, Junhua Xiao, and Peixin Wang. "Differential settlement and induced structural damage in a cut-and-cover subway tunnel in a soft deposit." Journal of Performance of Constructed Facilities 30, no. 5 (2016): 04016028.
[17] Oke, Jeffrey, Nicholas Vlachopoulos, and Vassilis Marinos. "Umbrella arch nomenclature and selection methodology for temporary support systems for the design and construction of tunnels." Geotechnical and geological engineering 32, no. 1 (2014): 97-130.
[18] Oke, J., N. Vlachopoulos, and M. S. Diederichs. "Numerical analyses in the design of umbrella arch systems." Journal of Rock Mechanics and Geotechnical Engineering 6, no. 6 (2014): 546-564.
[19] Oke, Jeffrey, Nicholas Vlachopoulos, and Mark S. Diederichs. "Semi-analytical model for umbrella arch systems employed in squeezing ground conditions."Tunnelling and underground space technology 56 (2016): 136-156.
[20] Cao, Liqiang, Qian Fang, Dingli Zhang, and Tielin Chen. "Subway station construction using combined shield and shallow tunnelling method: case study of Gaojiayuan station in Beijing." Tunnelling and Underground Space Technology 82 (2018): 627-635
[21] Ajorloo, H. "Methods of construction of urban tunnels and related challenges, a case study: Resalat, Niayesh and Ahvaz metro tunnels", Tehran Center for Studies and Planning, 2015, Report 331.( In Persian)
[22] Xiang, Yanyong, Shaohui He, Zhijie Cui, and Suozhu Ma. "A subsurface “drift and pile” protection scheme for the construction of a shallow metro tunnel." Tunnelling and underground space technology 20, no. 1 (2005): 1-5.
[23] Hamza, M., A. Ata, and A. Roussin. "Ground movements due to the construction of cut-and-cover structures and slurry shield tunnel of the Cairo Metro." Tunnelling and Underground Space Technology 14, no. 3 (1999): 281-289.
[24] Hamza, M., A. Ata, and A. Roussin. "Ground movements due to the construction of cut-and-cover structures and slurry shield tunnel of the Cairo Metro." Tunnelling and Underground Space Technology 14, no. 3 (1999): 281-289.
[25] Grigson, R., Ho, C., LeMus, P., “Second avenue subway project: deep excavation support of a cut-and-cover station”. In: Geotechnical and Structural Engineering Congress (2016, pp. 402–415.
[26] Madani, H., "Tunnel construction (Vol. I), drilling and execution", Amirkabir University of Technology (Tehran Polytechnic), 650 pages, 2001. ( In Persian)
[27] Isfahan Zayand Ab Company "Report on the review of methods and executive strategies of Oman Samani station", Iran, 2016. ( In Persian)
[28] Azmoneh Foulad Consulting Engineers "Report on Laboratory and On-Site Results of Isfahan Line 2 Metro, Oman Samani Station Well"s, 2015. ( In Persian). | ||
|
آمار تعداد مشاهده مقاله: 648 تعداد دریافت فایل اصل مقاله: 451 |
||